363-206-295
Maintenance Description
Issue 1 December 1997 9-7
All of the above features depend on the proprietary exchange of information
among Lucent NEs in a subnetwork, specifically the communication of each
remote NE’s alarm status to other NEs. Although the Remote NE Status features
were supported in previous releases of DDM-2000, such Lucent-only operations
features in multi-vendor subnetworks would not include other-vendor NEs, due to
the lack of applicable standards, and thus would be incomplete.
DDM-2000 OC-12 R7.0 still supports the following Lucent proprietary OI
applications between Lucent NEs in multi-vendor subnetworks:
■ Remote Craft Interface Terminal (CIT) login
■ Remote software download and copy
■ Remote NE-to-NE automatic time/date synchronization at start-up.
For more information about DDM-2000 OC-12 R7.0 OI, refer to 824-102-144,
Lucent Technologies 2000 Product Family Multi-Vendor Operations Interworking
Guide.
To Next Page
Loading...
Need help?
General
