Lucent Technologies DDM-2000 OC-12 User Manual

APPLY 8of2Page APPLY
are:parametersinputThe
date lasttherepresentsYYwhereYYMMDD,digitssixasenteredisDate
isDefaultday.theisDDandmonth,theisMMyear,theofdigitstwo
noIfday.systemcurrentthe date andentered,isparameter
action ofvaluethehas install isor NULL enteredtheand,
forvalue time currenttheininterval24-hourthepassedalreadyhas
date,system’s date (currentdaysystem’snextthetodefaultwill
but23:46istimecurrenttheifexample,an(As1).+daysystem’s
commandtheofexecutionthe21:00,forsetistimeprovisionedthe
day.)system’snextthe21:00atoccurwill
time whichattimetheidentifytoorderinsuppliedisparametertimeThe
noIfelement.networktheoninstalledbetoissoftwarethe time
theandentered,isparameter action ofvaluethehasparameter
install isor NULL forscheduledbewillsoftwarethethen,
thereceivingafterminutes15installation apply Thecommand.
canceltochanceauserthegivetodesignedisintervalfifteen-minute
networkothertocommand(s)similarissuetoand/orcommandthe
subnetwork.theinelement(s)
digitssixasenteredisparameterThis HHMM[SS]. HH theexpresses
fromrangevaluesallowedtheandbasisclock24-houraonhour 00
to 23 required.zerosleadingwith, MM andminutestheexpresses
fromrangevaluesallowedthe 00 to 59 required.zerosleadingwith
SS arevaluesallowedtheandsecondstheexpresses NULL aor
fromrangingvalue 00 to 59 required.zerosleadingwith
action betocommandthisofexecutiontheenablesparameteractionThe
are:valuesallowedThecanceled.orconfirmed,either
install timetheatsoftwareofinstallationthecausesactionThis
theinsupplieddateand time and date parameters.
ifminutes15inplacetakewillinstallationThe time and
date provisioned.notare
cancel installation.scheduledtheCancel
NULL isvaluedefaulttheentered,isvaluenoWhenvalue.No
install.
aandscheduled,alreadywasinstallationsoftwareaIf cancel value
canceled.isinstallationsoftwarethereceived,was
11-18 1997December1Issue OC-12DDM-2000

Lucent Technologies DDM-2000 OC-12 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-12
Category	Multiplexer
Language	English