Lucent Technologies DDM-2000 OC-12 User Manual

DLT-CRS-STS1 3of1Page DLT-CRS-STS1
NAME
STS-1Cross-ConnectionDeletedlt-crs-sts1:
FORMATINPUT
dlt-crs-sts1: Address1 , Address2 [: cct= CrsType];
DESCRIPTION
!
CAUTION:
service.affectmaycommandthisofExecution
cross-connections.STS-1deletescommandThis
releases.ringOC-12allwithavailableiscommandThis
are:parametersinputThe
Address1 and Address2 channels,STS-1twotheofaddressestheareThese
portDS3/EC-1/OC-3oneandchannelSTS-1oneor
betoiscross-connectionSTS-1existingthewhere
pass-throughapplications,ringIndeleted.
addresssametheusingbydeletedareconnections
for Address1 and Address2 .
Addresses:STS-1OC-12Valid
{a,b,c,d}-{1-3}mb-{1-12},
cct Thetype.cross-connectionthespecifiesCrsType
are:valuesvalid
twoway toapplycross-connectionsTwo-way
hairpin,add/drop,hubbing,terminating,
DS30x1andring,0x1pass-through,
value.defaulttheisThisconfigurations.
dc supportconnectionscontinueandDrop
continueandDropapplications.ringdual
theifallowedonlyareconnections
thewithequippedisaddressunitfunction
low-3DS3orOLIU21-type3STS1E,
packs.circuitspeed
NOTE:
The cct ifparameteroptionalanisparameter
isdeletedbetotypecross-connectionthe
twoway The. cct forrequiredisparameter
values.CrsTypeother
11-32 1997December1Issue OC-12DDM-2000

Lucent Technologies DDM-2000 OC-12 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-12
Category	Multiplexer
Language	English