Lucent Technologies DDM-2000 OC-12 User Manual

DLT-ULSDCC-L4 3of1Page DLT-ULSDCC-L4
NAME
DCCSectionLayerUpperDeletedlt-ulsdcc-l4:
FORMATINPUT
dlt-ulsdcc-l4:[L4ajsys= AJSystemId ][L4tdctid= TDCTID ];
DESCRIPTION
NOTE:
theoffunctionalitythedescribespagecommandThis dlt-ulsdcc-l4
releases.TARPlateralland7.0ReleaseOC-12incommand
7through3LayersofparametersprovisionabledeletetousediscommandThis
stackThisstack.protocol7-layer(OSI)interconnectionsystemsopentheof
networkforstructurelogicalaiswhichmodelreferenceOSIthetorefers
betweenprotocolcommunicationstandardadefinesmodelThisoperations.
OrganizationStandardsInternationalthebyspecifiedaselementsnetwork
(ISO).
user-settableholdwhichbuffersindataofrowadeletetousediscommandThis
ManuallyTARPthearebuffersThesestack.OSItheof4Layerinparameters
(TDC).CacheDataTARPtheandbufferNEAdjacent
NOTE:
usersprivilegedtoavailableiscommandthisthenenabled,issecurityIf
shelf.theonportsDCCorCITallforonly
are:parametersinputThe
L4ajsys theoffieldIdentifierSystemNSAPthespecifiesparameterThis
AdjacencyManualTARPthefromdeletedbetoNEadjacentTARP
TARPtheoffielddigit)hex(12byte6aisThisNE.localoflist
SystemtheNE,eachforuniqueisIDSystemtheSinceNE.adjacent
Adjacency.ManualspecificaidentifytosufficientisID
isparameterthisofformatThe L4ajsys= AJSystemId where,
AJSystemId NSAPtheoffieldIDSystemhex)(12-digitbyte6theis
list.theinNEAdjacenttheofaddress
MultipleNE.AdjacentManualsingleadeletesparameterThis
theofoccurrencesmultipleusingdeletedareNEsAdjacentManual
dlt-ulsdcc-l4 command.
OC-12DDM-2000 1997December1Issue 11-41

Lucent Technologies DDM-2000 OC-12 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-12
Category	Multiplexer
Language	English