Lucent Technologies DDM-2000 OC-12 User Manual

ENT-CRS-STS1 6of1Page ENT-CRS-STS1
NAME
STS-1Cross-ConnectionEnterent-crs-sts1:
FORMATINPUT
ent-crs-sts1: Address1 , Address2 [: cct= CrsType][, ring= RingId];
DESCRIPTION
andMainbetweencross-connectionsSTS-1bidirectionalsetscommandThis
applications.ringOC-12inslotsunitfunction
are:parametersinputThe
Address1 and Address2
STS-1oneorchannelsSTS-1twotheofaddressestheareThese
cross-betoarethatportDS3/EC-1/OC-3oneandchannel
traffic,pass-throughringSTS-1Forconnected. Address1 and
Address2 onlistedareaddressesValidslot.timesamethebemust
pages.followingthe
NOTE:
bidirectional.arecross-connectionsAll
cct are:valuesvalidThetype.cross-connectionthespecifiesCrsType
twoway terminating,toapplycross-connectionsTwoway
dualring,0x1hairpin,pass-through,add/drop,hubbing,
theisTwowayconfigurations.DS30x1andlocked,
antoconnectedbemayringOC-3Anvalue.default
single-or(dualconfigurationring0x1anyinringOC-12
homed).
dc ringdualsupportcross-connectionscontinueandDrop
continueandDropapplications.interworking
addressunitfunctiontheifallowedonlyareconnections
3DS3orOLIU21-type3STS1E,thewithequippedis
packs.circuit
thecross-connection,pass-throughaindicateaddressestheIf
tosetautomaticallyisbutforpromptednotisCrsType twoway The.
ofCrsTypeathatindicatesmessageconfirmation twoway beenhas
thanotherCrsTypeaIfuser.theforselected twoway onenteredis
pass-throughaindicateaddressesthewhenlinecommandthe
rejected.isrequestthecross-connection,
notisCrsTypetheIf dc notisandrequestednotisRingIdthe,
notisCrsTypetheIfmessages.confirmationindisplayed dc and,
RingId.forenteredvalueanyignorewillsystemtheentered,isRingId
11-44 1997December1Issue OC-12DDM-2000

Lucent Technologies DDM-2000 OC-12 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-12
Category	Multiplexer
Language	English