Lucent Technologies DDM-2000 OC-12 User Manual

RTRV-NE 3of3Page RTRV-NE
Apply
Action OC-12withstartingreportedisparameterThis
isgenericsoftwaredormantaIf7.0.Release
theandelement,networkthebystoredcurrently
apply programforschedulediscommand
withinstallation Action=install on
Date=date and Time=time reportedisdatethe,
HH:MM:SSastimeandYYMMDD,digit6aas
"blankayet,scheduledisinstallationprogramnoIf
reportwilltimeandDateAction.underreportedis"
Time=)Date=(example:alsovalues""blank
bystoredcurrentlyisgenericsoftwaredormantaIf
theandelement,networkthe apply iscommand
withscheduled Action=cancel is""blanka,
blankreportwilltimeandDateAction.forreported
Time=)Date=(example:alsovalues""
Schedule
Date OC-12withstartingreportedisparameterThis
theIf7.0.Release apply schedulediscommand
withinstallationprogramfor Action=install on
Date=date 6aasreportedisparameterThis.
YYMMDD.digit
Time OC-12withstartingreportedisparameterThis
theif7.0Release apply schedulediscommand
withinstallationprogramfor Action=install.
HH:MM:SSasreportedisparameterThis
macaddress and7.0ReleaseOC-12onlytoapplicableisparameterThis
ControlAccessMediatheisThisreleases.TARPOC-12later
storedisaddressThisLAN.IAOtheofaddress(MAC)
factorythebyEEPROMpack’scircuitOHCTLtheon(burned)
unique.isitand
12asdisplayedareaddressMACtheofbytes6The
MACaofexampleanisfollowingThedigits.hexadecimal
"08006alad06e".address:
COMMANDSRELATED
rtrv-map-network
OC-12DDM-2000 1997December1Issue 11-145

Lucent Technologies DDM-2000 OC-12 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-12
Category	Multiplexer
Language	English