RTRV-OC3 3of2Page RTRV-OC3
OLIUtheonswitchhardwareabydeterminedissetting
values:followingthehavemayparameterThispack.circuit
high poweropticalHigh
low poweropticalLow
settablenotispoweropticalthatindicateshyphenA—
pack.circuitOLIUtheonswitchesby
MessageKbyte areparameterthisforvaluesvalidThe enabled indicating,
andused,aremessagesSyncproprietarythat disabled,
used.notaremessagesSyncproprietarythatindicating
SONETtheinbyteK2theusemessagesSyncThe
Thesequality.synchronizationdeterminetooverhead
thebysetarevalues set-oc3 command.
MessageSync synchronizationoftypetheindicatesparameterThis
opticalOC-3thatforprovisionedbeenhasthatmessaging
thebyinterface set-oc3 forvaluesvalidThecommand.
areparameterthis Kbyte value),(default Sbyte and,
disabled S1theorbyteK2theusemessagessyncThe.
determinetooverheadlineSONETtheinbyte
quality.synchronization
Application only.releasesringOC-12allinavailableisparameterThis
assignedbehavioradditionaldefinesparameterreportThis
tosetisparameterthisIfunit.functionthisto 0x1 the,
thisIfapplication.ring0x1OC-12anofpartisunitfunction
tosetisparameter video or 0x1 protectionnoisthere,
pair.unitfunctionainpacksthebetweenswitching
AlarmAIS non-service-aoflevelalarmthespecifiesparameterThis
valuesvalidThecondition.failureAISlineOC-3affecting
are:
cr alarmCritical
mj alarmMajor
mn alarmMinor
na (default).reportedbutalarmed,Not
OC-12DDM-2000 1997December1Issue 11-147
To Next Page
Loading...
Need help?
General
