Lucent Technologies DDM-2000 OC-12 User Manual

RTRV-OC12 2of2Page RTRV-OC12
are:parametersoutputThe
AddressLine line.OC-12theofAddress
ThresholdDegradeSignal
tologarithmaasthreshold(BER)rateerrorbittheisThis
ofvalueThe10.basethe n -5ofrangeawithintegeranis
10ofBERstocorresponding-9through
− 5
10through
− 9
If.
anthanothersomethingwithequippedoremptyisslota
column.thisinappearwill(-)hyphenaunit,opticalOC-12
MessageKbyte Itearlier.and5.0ReleaseinavailableisparameterThis
lineOC-12eachofstateprovisionedcurrenttherepresents
bytesK2theusingmessagesynchronizationthesupportto
arevaluesvalidTheoverhead.SONETthein enabled,
andused,aremessagesSyncproprietarythatindicating
disabled notaremessagesSyncproprietaryindicating,
used.
MessageSync thisreleases,ringlaterand5.1ReleaseOC-12For
messagingsynchronizationoftypetheindicatesparameter
byinterfaceopticalOC-12thatforprovisionedbeenhasthat
the set-oc12 thisforvaluesvalidThecommand.
areparameter Kbyte value),(default Sbyte and,
disabled S1theorbyteK2theusemessagessyncThe.
determinetooverheadlineSONETtheinbyte
quality.synchronization
AlarmAIS non-service-aoflevelalarmthespecifiesparameterThis
valuesvalidThecondition.failureAISlineOC-12affecting
are
cr alarmCritical
mj alarmMajor
mn alarmMinor
na (default)reportedbutalarmed,Not
COMMANDSRELATED
set-oc3
set-oc12
11-150 1997December1Issue OC-12DDM-2000

Lucent Technologies DDM-2000 OC-12 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-12
Category	Multiplexer
Language	English