Lucent Technologies DDM-2000 OC-12 User Manual

RTRV-STATE-STS3c 2of2Page RTRV-STATE-STS3c
are:parametersoutputThe
Address channel.STS-3canofaddresstheisAddress
StateChannel identifiedchannelSTS-3ctheofstatetheisStateChannel
values:followingtheofonehavemayItfield.addressthein
auto thisonsignalgoodnoisThereAutomatic.
associatedconditionsstatusorAlarmchannel.
signalgoodaIfreported.notarechannelthiswith
bewillchannelthethenchannel,thisondetectedis
automatically.stateService""Intheinput
is andAlarmmonitored.ischannelTheService.In
normally.reportedareconditionsstatus
nmon beingnotischannelTheMonitored.Not
notareconditionsstatusandAlarmmonitored.
remainwillchannelThechannel.thisforreported
the(withchangedisstatetheuntilstatethisin
set-state-sts3c cross-theuntilorcommand)
(ringdeletedischannelthisinvolvingconnection
releases).
COMMANDSRELATED
dlt-crs-sts3c
ent-crs-sts3c
rtrv-crs-sts3c
set-state-sts3c
update
11-196 1997December1Issue OC-12DDM-2000

Lucent Technologies DDM-2000 OC-12 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-12
Category	Multiplexer
Language	English