Lucent Technologies DDM-2000 OC-12 User Manual

RTRV-SYNC 10of7Page RTRV-SYNC
AIS thatexistsfailureaifinsertedisAISDS1
thetooutputDS1theoftracingprohibits
todueinsertedalsoisItline.opticalincoming
messagesynchronizationincomingcertain
source.timingactivetheonlevelsquality
state.autotheinisslottheIndicates—
? isslotorunreadable,ispackcircuitThe
empty.andequipped
ReferenceActive
isoutputtimingDS1thethatlineactualtheshowsThis
values:followingthewithfrom,derivedbeing
main-b-1
main-b-2
InformationMessageSync
wherereporttheofsectiontheidentifiesheadingThis
timingthedeterminetousedmessagesoutputandinput
isreporttheofsectionThislisted.arequalitysource
theifonlyavailable kbyte tosetisparametermessage
enabled ifonlyavailableisreporttheofsectionthis.
forprovisionedbeenhasinterfacesopticaltheofany
kbyte or(default) Sbyte the(usingmessagingsync
set-oc3 theorcommand) set-oc3/set-oc12 (when
the(usingOLIUs).24-typehasMain set-oc3/oc12
commands).
LineOC-N
opticalofaddressestheidentifiesparameterThis
messages.synccarrycanthatinterfaces
MessageInput
disabled applicablenotisfieldthethatIndicates
synchronizationifexample,(for
disabled).ismessaging
? notismessagethethatIndicates
lineatodueexample,(forreadable
failure).
theidentifiescolumnThis Kbyte messageinput
havemayandline,interfaceopticaleachonreceived
values:followingtheofone
UseDon’t forsuitablenotisinterfaceThe
7).Level(Qualitytimingsynchronization
11-208 1997December1Issue OC-12DDM-2000

Lucent Technologies DDM-2000 OC-12 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-12
Category	Multiplexer
Language	English