Lucent Technologies DDM-2000 OC-12 User Manual

SWITCH-PATH-STS3c 4of1Page SWITCH-PATH-STS3c
NAME
STS3cPathSwitchswitch-path-sts3c:
FORMATINPUT
switch-path-sts3c: Address :pri= Priority ;
DESCRIPTION
ringprotectedpathonswitchingpathSTS-3ccontrolscommandThis
(one-way).unidirectionalalwaysisswitchingPathconfigurations.
releases.ringlaterand5.0ReleaseOC-12withavailableiscommandThis
are:parametersinputThe
Address carryingcurrentlychannelSTS-3ctheofaddresstheisAddress
iscommandthisWhentraffic.continueanddropordropped
thetopaththisfromawayswitchedbewilltrafficexecuted,
parameter.thisfordefaultnoisTherering.theonpathother
ring0X1theforprovisionedunitfunctionatodropsthatTraffic
are:addressesValidswitched.becannotapplicationvideoor
mb{1,2}-{1,4,7,10,all}.
pri request.switchprotectiontheofprioritytheindicatesPriority
isvaluevalidonlyandoneThe manual arequestsThis.
aunlesspathstandbythetopathaddressedthefromswitch
path.standbytheonexistsconditionpriorityhigher
STS-3ctheorequippednotiscommandtheinspecifiedaddresspaththeIf
willcommandthecross-connected,continueanddropordropped,notischannel
message:followingthewithdeniedbe
SVNS
/*etatSdilaVnitoN,sutatS*/
etcennoc-ssorcro/dnadeppiuqetonsihtapdeificepsehT*/ /*.d
11-330 1997December1Issue OC-12DDM-2000

Lucent Technologies DDM-2000 OC-12 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-12
Category	Multiplexer
Language	English