SWITCH-SYNC 4of1Page SWITCH-SYNC
NAME
SynchronizationSwitchProtectionswitch-sync:
FORMATINPUT
switch-sync:s=
SyncFunction
,pri=
Priority
;
DESCRIPTION
!
CAUTION:
service.affectmaycommandthisofExecution
switching.protectionsynchronizationtheofoperationcontrolscommandThis
andusedisreferencesynchronizationwhichcontrolusertheletscommandThis
needed.whenreferencesynchronizationaswitchtousertheenables
are:parametersinputThe
s theofonebemayandfunctionsynchronizationthespecifiesSyncFunction
following:
reference references.timingDS1ofswitchingprotectionSelects
forprovisionedissystemtheifonlySpecify External
timing.DS1
mode onlySpecifymode.timingofswitchingprotectionSelects
forprovisionedissystemtheif External orDS1
LineTimed.
circuitpack packs.circuittimingofswitchingprotectionSelects
src and/orline-timingshelfwhichfromlineopticaltheSelects
Thisderived.bewilloutputsynchronizationDS1the
Thisreleases.ringOC-12withavailableisparameter
isSyncAutoreconfigurationifapplicableonlyisparameter
theusingenabled set-sync Thecommand.
areswitchedbecanthatSynchronizationSources
main-b-1 and main-b-2.
pri Forrequest.switchingprotectiontheofprioritytheindicatesPriority
ofvaluesSyncFunction reference and circuitpack valuespriority,
are:
reset requestsswitchprotectionactiveClear
inhibit mechanismswitchingprotectiontheFreeze
manual topackreference/circuittimingactivefromSwitch
packreference/circuittimingstandby
11-334 1997December1Issue OC-12DDM-2000
To Next Page
Loading...
Need help?
General
