Lucent Technologies DDM-2000 OC-12 User Manual

NTP-002 363-206-295Acceptance:
1997December1,Issue2of2Page
LISTEDORDERINBELOWITEMSDO .... TOGODETAILS,FOR
B. required.ifsettings,switchoptionpackcircuit(check)Set DLP-510
(loopedMultiplexerOC-12DDM-2000(accept)Test
[back). NTP-003Acceptance: ]
C.
SystemOC-12DDM-2000end-to-end(accept)Test
[ NTP-004Acceptance: ]
D.
DS3eachonteststransmissionDS3performrequired,If
port.
E.
ConfigurationRingSingleA. DLP-508
Configuration(DRI)RingDualB. DLP-553
ConfigurationHomingSingle/DualC. DLP-508
F. tests.transmissionOC-3cperformrequired,If DLP-543
usingsettingsoptionVerify/set rtrv-ne/set-ne:
commands.
G.
usingsettingsoptionVerify/set ):)/set-(rtrv-(
commands.
H. DLP-509

Lucent Technologies DDM-2000 OC-12 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-12
Category	Multiplexer
Language	English