Lucent Technologies DDM-2000 OC-12 User Manual

NTP-003 363-206-295Acceptance:
1997December1,Issue5of4Page
LISTEDORDERINBELOWITEMSDO .... TOGODETAILS,FOR
2:NOTE
mayparametersprovisionabletesting,initialand/orinstallationDuring
STS-1values.defaulttheirtoresetbetoneedwhichsetbeenhave
shouldwhichmadebeenhavemaycross-connectionsSTS-3cand/or
Theservice.inplacedissystemthebeforedeletedbe
init-sys:all provisionableallresettousedbemaycommand
values.defaulttocross-connectionsandparameters
3:NOTE
An valuesDCCinconsistent thewhenoccurwillalarm
init-sys:all theusealarm,theclearToexecuted.iscommand
set-fecom:
address: com=disable DCC.thedisabletocommand
commandtheuserequired,If init-sys:all resetto
values.defaulttoparametersprovisionable
6.
NOTE:
toconnectedbeenhasDDM-2000thethatassumeproceduresThese
required.aspoints,cross-connect)DSX-(the 3DS3 and/or 3STS1E
theseperformingbeforerequired,asinserted,bemustpackscircuit
tests.
required.asgroup,eachforteststransmissionPerform
theinstalledthatorganizationtofailuresanyRefer
DDM-2000.
inTestRingOC-12SingleDS3A. Demux Direction DLP-508
inTest(DRI)RingDualDS3B. Demux Direction DLP-553
inTestHomingSingle/DualDS3C. Demux Direction DLP-508

Lucent Technologies DDM-2000 OC-12 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-12
Category	Multiplexer
Language	English