Lucent Technologies DDM-2000 OC-12 User Manual

NTP-004 363-206-295Acceptance:
1997December1,Issue8of4Page
LISTEDORDERINBELOWITEMSDO .... TOGODETAILS,FOR
fromfacilityopticaltheoflossopticaltheDetermine
measurements.requiredthemakingbyorrecordsoffice
3.
4.
NOTE:
onswitchesoptionnoareThere 23G/23G-U, 23H/23H-U, 21G2-U or
OLIU21D/21D-U s.
If OLIU21G/21G-U ensureinstalled,ares HIGH/LOW
POWER oflossthewithagreetosetareswitchesoption
facility.opticalthe
DLP-510
Use rtrv-fecom: and set-fecom:com=enabled
allbetweenchannelDCCtheverify/enabletocommands
required.asnodes,
5.
6.
NOTE:
The rtrv-map-network and rtrv-map-neighbor commands
insystemstheincludingnetwork,theofmaparetrievetousedbemay
connected.aretheyhowandnetworkthe
(shelvesOC-12DDM-2000allEnsure OLIU theins)
opticalthetoconnectedproperlybeenhavenetwork
span.opticaleachofintegritytheVerifyfacility.
A. OLIUMAIN s DLP-511
B. OLIUUNITSFUNCTION s DLP-551

Lucent Technologies DDM-2000 OC-12 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-12
Category	Multiplexer
Language	English