Order:Circuit363-206-295 NTP-007
9of3Page1997December1,Issue
LISTEDORDERINBELOWITEMSDO .... TOGODETAILS,FOR
4.
1:NOTE
If OLIU21G/21G-U theused,arepackscircuit POWERHIGH/LOW
tosetbemustswitch LOW loops.opticaltheconnectingbefore
2:NOTE
anenabled,isfecomIf valuesDCCinconsistent willalarm
thewhenoccur OLIU occursalarmtheNormally,back.loopedares
theonparametersuser/networkthewhen OHCTL theofendsbothats
useloopback,fiberaduringalarmtheclearTosame.thesetareDCC
the set-fecom:
address:
com=disable thedisabletocommand
DCC.
forloopsopticalConnect OLIUUNITSFUNCTION installed.justs
5.
NOTE:
The rtrv-oc3: theretrievescommand LineOC-3
ReportProvisioning eachaboutinformationlistsreportThis.
thebysetattributesincludesinformationThisline.OC-3/IS-3
set-oc3: (applicationsThecommand.
app
theofparameter) set-
oc3 tosetbemustcommand
1
+
1
thefor UNITSFUNCTION slots
Reports"and"CommandstheSeeshelf.OC-12theinusedbeing
theofdescriptionaformanualthisofsection rtrv-oc3: command
format.
theUse rtrv-oc3/set-oc3: verify/settocommand
toparameterapplicationsthe
1
+
1
otherverify/setand
(Forpairs.lineorlineOC-3/IS-3theofcharacteristics
1,Figureseeexample,
set-oc3:fn-{a,b,c,d,all},app=
1
+
1
)
To Next Page
Loading...
Need help?
General
