Magtec MT884 - Backup and Data Management; Standard Data Backup Procedure; Clip Backup Functionality

Basic Operation
AHD Hybrid DVR User Manual
8
There are two kinds of remote controller. The interface of remote controller is shown as below.
Button
Function
Power Button
Switch off—to stop the device
Record Button
To start recording
-/-- /0-9
Input number or choose camera
Fn1 Button
Unavailable temporarily
Multi Button
To choose multi screen display mode
Next Button
To switch the live image
SEQ
To enter into auto dwell mode
Audio
To enable audio output in live mode
Switch
To switch the video output
Direction button
To move cursor in setup or pan/title PTZ
Enter Button
To confirm the choice or setup
Menu Button
To go to menu
Exit Button
To exit the current interface
Focus/IRIS/Zoom/PTZ
To control PTZ camera
Preset Button
To enter into preset setting in PTZ mode
Cruise Button
To go to cruise setting in PTZ mode
Track Button
To go to track setting in PTZ mode
Wiper Button
To enable wiper function in PTZ mode
Light Button
To enable light function in PTZ mode
Clear Button
To return to the previous interface
Fn2 Button
Unavailable temporarily
Info Button
Get information about the device.
To control playback.Play/Pause/Stop/ Previous
Section/ Next Section/Backward/ Forward
Snap Button
To take snapshots manually
Search Button
To go to search mode
Cut Button
To set the start/end time for backup
Backup Button
To go to backup mode
Zoom Button
To zoom in the images
PIP Button
To go to picture in picture setting mode
* You shall press P.T.Z button to enter PTZ setting mode, choose a channel and press P.T.Z button again
to hide the P.T.Z control panel. Then you can press preset, cruise, track, wiper or light button to enable
the relevant function.