Need help?Do you have a question about the Magtec MT884 and is the answer not in the manual?
Instructions for powering the AHD Hybrid DVR on and off correctly, including procedures for remote controller and keyboard/mouse.
Step-by-step guide to configure essential settings like device name, network, and disk management upon first use.
Instructions on how to log in to the AHD Hybrid DVR system with default credentials.
Explanation of the live view interface, including symbol definitions and control bar functions.
Procedure to search for and add IP cameras connected to the local network (LAN).
Steps to add IP cameras connected via the Wide Area Network (WAN), including manual IP input.
Configuration of recording parameters such as record enable, audio, bitrate, resolution, and quality.
Setting up a daily and weekly schedule for automated recording based on specific time slots.
Configuring the system to trigger recording automatically when motion is detected by the cameras.
Setting up recording to be triggered by external sensors connected to the alarm input ports.
How to search and play back recorded footage using specific dates and times.
Searching and playing back footage based on detected events like motion or sensor triggers.
Steps for backing up recorded data to external storage devices like USB drives.
Configuring the system to trigger alarms based on connected external sensors.
Setting up motion detection parameters and defining actions to take when motion is detected.
Configuring IP address, subnet mask, gateway, and DNS for network connectivity.
Steps to create, edit, and remove user accounts with specific authority levels.
Managing hard disk drives, including checking status and formatting for use.
Configuring NAT settings on the DVR to allow remote access over the internet.
Steps to access the DVR remotely via a NAT server using an IE browser.
Accessing the DVR remotely from within the same local network (LAN).
Connecting to the DVR remotely over the Wide Area Network (WAN) via router or direct connection.
Overview of the remote live view screen, including status indicators and control buttons.
Performing playback and backup operations remotely through the network interface.
Accessing and modifying system settings remotely via the network interface.
To Next Page
General