2 - 31
LOCKING HYDRAULIC CONTROLS
HYDRAULIC CONTROLS AVAILABLE (by default)
TILTING CONTROL LOCKED
HYDRAULIC CONTROLS LOCKED
•
NOTE: When driving on the road, it is strongly recommended that you lock all hydraulic movements.
Press
or button to display the other available mode(s), the first screen displayed is the opposite of the
enabled mode.
7D - DISPLAY
SCREEN OFF
Lift truck parked, with ignition off and without the driver.
MANITOU
LOGO SCREEN
System initialising. A beep is sounded when this screen appears. If the screen remains permanently displayed, contact your
dealer.
0 0 _ _
DIGICODE SCREEN
The digicode is disabled by default. It can be enabled from the OPT menu on the menu screen. A beep is sounded when this
screen appears.
- Switch on the telehandler ignition. Enter the code (default 0000) using the keys on the keyboard and confirm with the
confirm button
. Automatically moves to the next character.
NOTE: The code can be modified in the OPT menu (e: MENU SCREEN).
CHANGE MODE
Press
1
2
1
2
Confirm
Cancel
Press
1
2
1
2
Confirm
Cancel
Press
1
2
1
2
Confirm
Cancel
To Next Page
Loading...
Need help?
General
