2 - 30
OPTION BOOM SUSPENSION
E: 2 – DESCRIPTION: DESCRIPTION AND USE OF OPTIONAL DEVICES.
OPTION - ATTACHMENT EASY HYDRAULIC CONNECTION
E: 2 – DESCRIPTION: DESCRIPTION AND USE OF OPTIONAL DEVICES.
OPTION - REAR FOG LIGHT
Only works when the low beam or main beam lights are switched on. The indicator will light when in use.
OPTION - FRONT WORKING HEADLIGHTS
ROTATING BEACON LIGHT
NOTE: Except in case of emergency, it is advised to disable the rotating beacon light when the I.C. engine is switched off
to avoid a flat battery.
MENU SCREEN DISPLAY
A flashing light indicates a fault (e: 2 – DESCRIPTION: 7D - DISPLAY: MENU SCREEN).
CANCEL OR BACK
CONFIRM
TESTING THE LONGITUDINAL STABILITY LIMITER AND WARNING DEVICE
E: 2 – DESCRIPTION: 8 - SIGNALLING DEVICE AND LONGITUDINAL STABILITY LIMITER.
FAN INVERSION
Cleans the radiator grille and the grille of the engine cover by reversing the air flow.
The button is constantly lit as soon as automatic mode is activated.
t
IMPORTANT
t
During operation, pay attention to the risk of material being projected when cleaning the grilles. Wear suitable protective goggles.
- A short press on the button launches an individual fan reversal cycle.
- The screen
appears when there is insufficient time between two individual ventilation fan reversal cycle requests.
- Holding down the button launches the automatic fan reversal every 3 minutes, the screen
appears.
- A short press on the button stops the automatic fan reversal, the screen
appears.
HAND-OPERATED PARKING BRAKE
The hand-operated or automatic (by default) parking brake can be configured from the OPT menu in the menu screen.
HAZARD WARNING LIGHTS
This switch enables both indicators to be switched on simultaneously, even with the I.C. engine off.
NOTE: Except in case of emergency, it is advised to disable the rotating beacon light when the I.C. engine is switched off
to avoid a flat battery.
649100 EN-US-AU (20/05/2019)
MLT 961-145 V PLUS L JD ST4 S1
To Next Page
Loading...
