Manitowoc 18000 Service Maintenance Manual

Reference Only
©2017 Manitowoc
Published 12-05-17, Control # 035-23
SERVICE/MAINTENANCE MANUAL
This manual is divided into the following sections:
SECTION 1 INTRODUCTION
SECTION 2 HYDRAULIC SYSTEM
SECTION 3 ELECTRIC SYSTEM
SECTION 4 BOOM
SECTION 5 HOISTS
SECTION 6 SWING
SECTION 7 POWER TRAIN
SECTION 8 UNDER CARRIAGE
SECTION 9 LUBRICATION
SECTION 10 TROUBLESHOOTING
NOTICE
The serial number of the crane and applicable attachments (i.e. luffing jib, MAX-ER
®
) is
the only method your Manitowoc dealer or the Manitowoc Crane Care Lattice Team has
of providing you with correct parts and service information.
The serial number is located on a crane identification plate attached to the operator’s
cab and each attachment. Refer to the Nameplate and Decal Assembly Drawing in
Section 2 of this manual for the exact location of the crane identification plate.
Always furnish serial number of crane and its attachments when ordering parts or
discussing service problems with your Manitowoc dealer or the Manitowoc Crane Care
Lattice Team.
To prevent death or serious injury:
• Avoid unsafe operation and maintenance.
Crane and attachments must be operated and maintained by trained and
experienced personnel. Manitowoc is not responsible for qualifying these
personnel.
• Do not operate or work on crane or attachments without first reading and
understanding instructions contained in Operator Information Manual and
Service Manual supplied with crane and applicable attachments.
• Store Operator Information Manual and Service Manual in operator’s cab.
If Operator Information Manual or Service Manual is missing from cab,
contact your Manitowoc dealer for a new one.
WARNING
This manual has been prepared for and is considered part of -
18000
Crane Model Number
18001Ref
Crane Serial Number
1
4
5
6
7
8
2
3
9
10

Manitowoc 18000 Specifications

General

Brand	Manitowoc
Model	18000
Category	Construction Equipment
Language	English