Manitowoc 18000 Service Maintenance Manual

Reference Only
Manitowoc Published 12-05-17, Control # 035-23 3-5
18000 SERIVCE/MAINTENANCE MANUAL ELECTRIC SYSTEM
3
Alphabetical Index of Components
Find the desired component item in this index. Check the
component item node location, then see indicated node to
find the test voltage for that item.
Node Heading Descriptions
CAN ID. NO. indicates the can bus system node number,
cable, receptacle number, and pin number code (43-D) is as
follows:
• The letter and number 43 is the cable number.
• The number 4 is the node number.
• The number 3 is the receptacle number where the item
is located on the node.
• The last number D is the pin number of the receptacle.
FUNCTION TYPE indicates the type of connection - such as
power, ground, signal, analog input (AI), digital input (DI), or
digital output (DO).
RECPT/PIN NO. (Engine Node 0 only) indicates input to
receptacle number and pin number code (P1-7 or J2-E).
WIRE NO. (Engine Node 0 only) indicates wire to computer
internal receptacle (0107) or wire number code (6C12A).
DESCRIPTION indicates the component item.
PACKET NO. indicates location of items for master node 1,
node 2, universal nodes (3 though 9), boom node 20, and
luffing jib node 21. Engine node 0 does not have packet
numbers.
Master (front console node) node 1:
• FCN-2-4 (Limit Bypass Switch) indicates where the
inputs/output are located on the master node 1.
• FCN is the packet location number.
• Number 2 is the bank where information is stored.
• Number 4 is the identifier for that item.
Node 2, universal nodes (3 though 9), boom node 20, and
luffing jib node 21:
• CAN38-1-32 (Return Filter Alarm Switch) indicates
where the inputs/output are located on the node.
• CAN38 is the packet location number.
• Number 1 is the bank where information is stored.
• Number 32 is the identifier for that item.
Component Location
Accessory System Components Node 4
Adapter frame Pins Node 6
Alarms Node 5
Air Conditioning Clutch Nodes 0 & 1
Auto Lube Node 7
Block Up Limit (Boom) Node 20
Block Up Limit (Luffing Jib) Node 21
Cab Switches and Controls Nodes 1 & 2
Cab Power Node 0
Cab Tilt Node 4
Control Handles Nodes 1 & 2
Drum 1(Main Hoist 1) Components Nodes 3 & 8
Drum 2 (Main Hoist 2) Components Nodes 3 & 6
Drum 3 (Whip Line Hoist) Components Nodes 3 & 4
Drum 4 (Boom Hoist) Components Nodes 5 & 6
Drum 5 (Mast Hoist) Components Nodes 4 & 6
Drum 6 (Luffing Hoist) Components Nodes 5 & 8
Drum 7 (Rigging Winch) Components Nodes 4 & 6
Engine Control Module Node 0
Filters Node 5
Jacking Components Node 4
Limits Node 5
Mast Node 4
MAX-ER Node 9
Pressure Senders Nodes 3, 5 & 6
Swing Components Nodes 3 & 7
Throttle (Hand and Foot) Node 2
Travel Components Nodes 3, 6 & 7

Manitowoc 18000 Specifications

General

Brand	Manitowoc
Model	18000
Category	Construction Equipment
Language	English