Swing-away lattice
3.4 Description of the rigging work
3 - 30 3 112 441 en Lattice extension operating instructions
GMK 4100/4100-L/5095
11.01.2008
Transport condi-
tion with folded
swing-away lat-
tice
The transport condition is established when all of the following connections
have been made.
Check the connections and establish them if necessary.
When section 1 and section 2 are folded:
–In the
Front area, section 1 must be engaged at the slewing axis (5) on
the main boom and the slewing axis must be secured with the pin (6);
à Establishing the connection, p. 3 - 38.
–In the
Middle area, the connection (4) is in the position Section 1/
Section 2
; à p. 3 - 42.
–In the
Rear area, the connection (2) between section 2 and the main
boom is established;
à p. 3 - 44.
–In the
Rear area, the connection (3) between section 1 and section 2 is
established;
à p. 3 - 48.
The unneeded pin (1) is secured in the retaining sheet.
– The pins (7) on section 1 are secured with retaining pins.
To Next Page
Loading...
