Manitowoc MLC300 - Rotating Bed Hydraulic Valves

Reference Only
HYDRAULIC SYSTEM MLC300 SERVICE/MAINTENANCE MANUAL
2-12
Published 11-22-17, Control # 257-02
Rotating Bed Hydraulic Valves
Item Description
1 Gantry Equalizer Pin Puller Valve
2 System A—Left Valve Manifold (from left to right):
• Accessory System Valve
•Drum 4 Valve
• Drum 5 Valve (not used)
• Left Travel Valve
3 Live Mast Raise/Lower Valve (right valve is a spare)
4 Live Mast Pin Puller Valve
5 Boom Butt Pin Puller Valve (bottom valve is a spare)
6 Drum 0 (rigging winch) Valve
7 System B—Right Valve Manifold (from left to right):
•Drum 4 Valve
• Right Travel Valve
•Drum 6 Valve
• Accessory System Valve
8 Swing Brake Valve (top)
Drum 1/3 Selector Valve (bottom)
9 Cab Tilt Valve
FIGURE 2-12