Manitowoc MLC300 - Page 42

Reference Only
HYDRAULIC SYSTEM MLC300 SERVICE/MAINTENANCE MANUAL
2-16
Published 11-22-17, Control # 257-02
FIGURE 2-15
Item Description
1 Hydraulic Tank
2 Filter 1 (return oil)
3 Power-Fill Coupling
4 Oil Level Sight Gauge
5 Schrader Valve
6 Vent Valve (requires a mating coupler)
7 Desiccant Breather
8 Level Sensor
9 Heater (if equipped)
10 Access Cover (qty 3)
11 Quick-Drain Valve (qty 2)
12 Shut-Off Valve Operator: Pump 5
13 Shut-Off Valve Operator: Pumps 2, 7, and 8
14 Shut-Off Valve Operator: Pumps 4 and 6
15 Shut-Off Valve Operator: Pumps 1 and 3
16 Shut-Off Valve Closed Position (must remove safety pin)
17 Shut-Off Valve Open Position
18 Valve Operator (M16 hex)
19 Safety Pin
20 Padlock Holes (for owner-furnished padlock)
21 Fill Cap (past production only)
Past
Current