Martin MAC Encore Performance - Replacing The Reflector

Service manual
36 of 46MAC Encore Performance - Revision A, 12-20-2017
Figure 86: Replacing the lens
11. Remove the connectors (8).
12. Replace the lens.
NOTE! Make sure that the arrow (9) points
towards index 3.
13. Follow the procedure in reverse order.
8
9
Figure 88: Replacingthereector
3. Replace the reector.
NOTE! Make sure that the arrow points towards
the side with index 3.
4. Follow the procedure in reverse order.
2
Figure 87: Removing the screws
Replacing the reector
1. Remove the lens. Follow the procedure in
“Replacing the lens” on page 36.
2. Remove the three Torx10 screws (1).
1