Matrox Solios Series - Technical Features of Matrox Solios eA;XA

116 Appendix B: Technical information
Technical features of Matrox Solios eA/XA
• PCIe or PCI/PCI-X long board. Matrox Solios XA has a universal (3.3 V - 5 V)
64-bit PCI/PCI-X board edge connector. Matrox Solios eA Quad and Dual have
a x4 PCIe connector, while Matrox Solios eA Single has a x1 PCIe connector.
• Three factory configured versions:
- Single acquisition path (Single).
- Two independent acquisition paths (Dual).
- Four independent acquisition paths (Quad).
• With Matrox Solios eA/XA Dual, acquisition paths can be combined to acquire
from one dual-tap monochrome video source.
• With Matrox Solios eA/XA Quad, acquisition paths can be combined to acquire
from:
- Component RGB video source.
- Two dual-tap monochrome video sources.
• Captured data can be converted into YUV or YCbCr formats.
• Supports frame and line-scan video sources.
• One to four independent acquisition paths, depending on the board. Each
acquisition path has the following:
- Input from one of two software selectable sources. The sources are AC coupled.
- Two low-pass filters with cut-offs at 33 MHz and a 7.5 MHz, respectively.
- Variable gain amplifier and adjustable offset to set the black and white reference
levels.
- 10-bit A/D with a 65 MHz sampling rate.
- An LVDS/TTL pixel clock input/output.