Matrox Solios Series - Acquisition with Matrox Solios eA;XA

Matrox Solios boards 15
Acquisition with Matrox Solios eA/XA
Matrox Solios eA/XA boards are high-performance, high-frequency, and
high-fidelity analog frame grabbers. They are available in three factory-configured
versions: Matrox Solios eA/XA Single, Matrox Solios eA/XA Dual, and Matrox
Solios eA/XA Quad.
Matrox Solios eA/XA Single
Matrox Solios eA/XA Single can acquire from one analog video source. This
acquisition path has an input selector that can switch between receiving input
from one of two video sources. Matrox Solios eA/XA Single does not support the
optional Processing FPGA.
PCI-X to PCIe (eA)
or PCI-X to PCI-X (XA)
Bridge
Input
Selector
10-bit
A/D
LUTs
Clock (LVDS/TTL)
Hsync/Csync
(LVDS/TTL)
Vsync (LVDS/TTL)
Aux In (Trigger (TTL))
Aux Out (Exposure (TTL))
Rx
Tx
PSG
10 16
Independent
acquisition
path 0
DVI
connectors
(0 and 1)
LVDS/TTL
drivers and
receivers
Aux In
Aux In
Aux Out
DB-44
and
DB-9
connectors*
Video to
PCI-X bridge
Independent
acquisition path
VID_IN
B
64
(up to 660 MB/s)
64-bit PCI or PCI-X (XA)
(up to 1 GB/s)
* On a separate bracket.
A
Matrox Solios eA/XA Single
Acquisition
memory
(64/128/256 MB)
(up to 1.32 GB/s)
64 DDR
Attenuator,
offset,
and
gain
low
pass
filter
Color
space
converter
Host PCI / PCI-X / PCIe bus
16
Opto-
couplers
UART
RS-232
transceivers
DC
restoration
2
8
1
x1 PCIe (eA)
(up to 250 MB/s)