164 Appendix C: Major revisions of Matrox Solios boards
Major revisions of Matrox Solios
RoHS-compliant versions of Matrox Solios eA/XA
Part number Version Description
SOL6M1A* 200 First shipping version.
201 Moved to secondary source for A/D. This was done to ensure availability.
202 Improved product packaging.
203 Added pull-up resistors to the interface of the CPLD. This was a preventive
action.
204 Moved to primary source for A/D. This was done to ensure availability.
SOL6M1AS* 000 First shipping version.
001 Modified the power-up sequence of the PCIe bridge. This was a corrective
action. For more information, refer to product bulletin MIPB-77.
002 Moved to secondary source for A/D. This was done to ensure availability.
003 Improved product packaging.
004 Replaced a pull-up resistor so that stronger PCIe interrupt signals could be
transmitted. This was a preventive action.
005
Changed the default acquisition firmware.
1
006 Upgraded the PCI-X to PCIe bridge to a new version. This was done to
ensure availability.
SOL6M2A* 200 First shipping version.
201.01 Moved to secondary source for A/D. This was done to ensure availability.
SOL6M2AE* 100 First shipping version.
101 Upgraded the PCI-X to PCIe bridge to a new version. This was done to
ensure availability.
SOL6M4A* 200 First shipping version.
201 Moved to secondary source for A/D. This was done to ensure availability.
202 Improved product packaging.
203 Added pull-up resistors to the interface of the CPLD. This was a preventive
action.
204 Moved to primary source for A/D. This was done to ensure availability.
To Next Page
Loading...
