Major revisions of Matrox Solios 167
SOL6MFCE* 100 First shipping version.
101 Replaced the LVDS receiver to suppor t 5 V LVDS auxiliary input signals
(required to support most rotary encoders). This was done to enhance the
feature set. For more information, refer to product bulletin MIPB-56.
104 Modified the power-up sequence of the PCIe bridge. This was a corrective
action. For more information, refer to product bulletin MIPB-77.
105 Changed product packaging.
106 Added pull-up resistors to the interface of the CPLD. This was a corrective
action. For more information, refer to product bulletin MIPB-95.
107 Replaced a pull-up resistor so that stronger PCIe interrupt signals could be
transmitted. This was a preventive action.
108 Upgraded the PCI-X to PCIe bridge to a new version. This was done to
ensure availability.
201 New PCB revision. No change to fit, form, or functionality.
SOL6MFC30546* 100 First shipping version.
101 Added termination resistors to the interface of the Processing FPGA. This
was a corrective action.
102 Added a JTAG connector that can be used to validate an FPGA
configuration loaded in the Processing FPGA. This was done to enhance
the feature set.
103 Improved product packaging.
104 Changed a TTL buffer of a TTL auxiliary output signal to one with a higher
voltage tolerance. This was a preventive action.
SOL6MFCE30546* 100 First shipping version.
101 Added termination resistors to the interface of the Processing FPGA. This
was a corrective action.
102 Improved product packaging.
103 Added a JTAG connector that can be used to validate an FPGA
configuration loaded in the Processing FPGA. This was done to enhance
the feature set.
104 Replaced a pull-up resistor so that stronger PCIe interrupt signals could be
transmitted. This was a preventive action.
105 Upgraded the PCI-X to PCIe bridge to a new version. This was done to
ensure availability.
SOL6MCLB* 005 First active-product version.
SOL6MCLBE* 007 First active-product version.
RoHS-compliant versions of Matrox Solios eCL/XCL
Part number Version Description
To Next Page
Loading...
