Deactivation and scrapping of appliance
OBLIGATION OF DISPOSING OF MATERIALS USING THE LEGISLATIVE PROCEDURE IN FORCE IN
THECOUNTRYWHERETHEAPPLIANCEISSCRAPPED.
PURSUANTTOthedirectives(seesection no.0.1)relating to the reduction of use of the hazardous sub
-
stancesintheelectricalandelectronicapplianceandtothewastedisposal.Thesymbolofthebarredwaste
bin carried on the appliance or its packaging indicates that the product at the end of its useful life it must be
disposedofseparatelyfromotherwaste.
Sortedwastedisposalofproductsattheendoftheirusefullifeisorganisedandmanagedbythemanufacturer.
Theusershoulddisposeofthisequipmentcontactingthemanufacturerandfollowingthesystemadoptedby
the latter to allow the separate collection of the equiment at the end of its service life. Appropriate separate
collectionforsubsequentstart-upofequipmentassignedtorecycling,treatmentanddisposalthatisenviron
-
mentallycompatiblecontributestoavoidingpossiblenegativeeffectsontheenvironmentandonhealthand
promotesthereuseand/orrecyclingofthematerialsofwhichtheequipmentiscomposed.Iftheholderofthis
productdisposesofitillegally,thisinvolvestheapplicationofadministrativesanctionsprovidedbythelawsin
force.
Specialised personnel is in charge of deactivation and scrapping of the appliance.
Waste disposal
During operation and maintenance, do not disperse pollutants (oils, grease, etc.) into the en-
vironment and perform differentiated waste disposal depending on the composition of the
different materials and in compliance with relevant laws in force.
Illegalwastedisposalwillbeprosecutedbylawsinforceintheterritorywheretheviolationhasbeenascer
-
tained.