Page 15 of 188
User Manual MAS-100 Regulus en.docx, Version: 4.0
1.4. PRODUCT LABELING
The information imprinted on the body of the anemometer
identifies the instrument and its manufacturer.
The information includes:
– Instrument description
– Instrument type
– Serial number
– Manufacturer name, address and contact data
– Country of origin
– Regulatory information
– Date of manufacture
– Battery type
SIGNIFICANCE OF THE SYMBOLS ON THE LABEL
Indicates the serial number of the anemometer.
Identifies the manufacturer of the anemometer.
With the CE symbol the manufacturer declares conformity with the relevant di-
rectives of the European Union as stated in the «Declaration of Conformity»
which can be found on the website DIGITAL ANEMOMETER MAS-100 REGULUS®
(mbv.ch).
With the EAC symbol the manufacturer declares conformity with the relevant di-
rectives of the Eurasian Trade Union as stated in the «Declaration of Conformity»
which can be found on the website DIGITAL ANEMOMETER MAS-100 REGULUS®
(mbv.ch).
This symbol indicates that this electronic information product does not contain
any toxic or hazardous substances or elements above the maximum concentra-
tion value established by the Chinese standard SJ/T11363-2006 as stated in sec-
tion 17.1, and can be recycled after being discarded and should not be casually
discarded.
Read the instructions before using the anemometer.
The KC (Korea Certification) mark indicates that the product meets Korean EMC
and electric safety requirements.
With this symbol the manufacturer declares conformity with the WEEE directive
as described in the «Declaration of Conformity» which can be found on the web-
site DIGITAL ANEMOMETER MAS-100 REGULUS® (mbv.ch). It should not be dis-
posed of as household waste at the end of its life. To prevent possible harm to
the environment or human health from uncontrolled waste disposal, please sepa-
rate this anemometer from other types of wastes and recycle it responsibly to
promote the sustainable reuse of material resources. Users should either send
the anemometer back to the supplier or dispose it locally in accordance with the
applicable local waste legislations.
Indicates the date of manufacture.
To Next Page
Loading...