Page 5 of 188
User Manual MAS-100 Regulus en.docx, Version: 4.0
ABBREVIATIONS
The digital anemometer MAS-100 Regulus is designated hereafter as «anemometer».
Microbiological air samplers of the MAS-100 product family are designated hereafter as «air
sampler».
The Communication & Calibration (C&C) PC Softwares of the air samplers are designated
hereafter as «PC Software».
A comprehensive list of all used abbreviations can be found in Annex D – Glossary.
APPLICABILITY
The information in this manual is valid for the following configurations:
Component Version
Firmware MAS-100 NT/NT Ex
Firmware MAS-100 Iso NT
Firmware MAS-100 Iso MH
≥ 1.7.18
≥ 2.8.5
≥ 1.2.6
C&C PC Software MAS-100 NT/NT Ex
C&C PC Software MAS-100 Iso NT/MH
≥ 1.6.31
≥ 3.1.14
RELATED USER MANUALS
The following user manuals provide additional essential information:
Document Scope
MAS-100 Iso NT Installation Manual Describes the installation options.
Contains technical information and the in-
stallation checklist.
MAS-100 Iso MH Installation Manual Describes the installation options.
Contains technical information and the in-
stallation checklist.