Page 80 of 188
User Manual MAS-100 Regulus en.docx, Version: 4.0
6) Once the last character has been entered and con-
firmed with with the button, the air sampler will
display one of the following messages:
1. The Hello User welcome message.
2. The Expired! message (if calibration is expired).
3. The Not OK message (if password was wrong).
After messages 1 and 2 the air sampler will auto-
matically revert to the next step.
Welcome message:
Expired calibration:
Failed login:
If the login failed, press ► button to retry.
7) The air sampler is ready for the next options:
– For an automatic adjustement and calibration
proceed with chapter 8.4.
– For a manual adjustement proceed with chap-
ter 8.5.
To Next Page
Loading...