McCrometer ProComm - Page 35

Menu
Position
Converter Function Code Function Name Function Description
Access
Level
MCP
Command
The following functions are activated by [D.logger en= ON]
10.2
[Meas. units= ON]
Unite of Measure
Measure unit recording enable
AL3 [DLUME]
10.3
[Field separ.= ;]
Field separator
character
This function will set the separator
character between data logger
data.
AL3 [DLFSC]
10.4
[Interv.=xx:xx:xx]
Sample Interval Sampling interval. This function
scans the log frequency. [Interv.=
Hours : Minutes: Seconds]
AL3 [DLGSI]
10.5
[Log T+=ON]
Totalizer Total
positive
Enable logging of total direct
totalizer.
AL3 [DTTPE]
10.6
[Log P+=ON]
Totalizer Partial
positive
Enable logging of partial direct
totalizer.
AL3 [DTPPE]
10.7
[Log T+=ON]
Totalizer Total
Negative
Enable logging of total reverse
totalizer
AL3 [DTTNE]
10.8
[Log T-=ON]
Totalizer Partial
Negative
Enable logging of partial reverse
totalizer
AL3 [DTPNE]
10.9
[Log TN=ON]
Totalizer Total Net Enable logging of total net
totalizer
AL3 [DLTNE]
10.10
[Log PN=ON]
Totalizer Partial
Net
Enable logging of partial net
totalizer
AL3 [DLPNE]
10.11
[Log Q(UM)=ON]
Log Flow rate in
measure unit
Enable logging of ow rate in
measure unit
AL3 [DFTUE]
10.12
[Log Q(%)=ON]
Log Flow rate in
percentage
Enable recording of the ow rate
as a percentage of full scale value
set.
AL3 [DFPCE]
10.13
[Log AL.EV=ON]
Alarm events
Enable logging of alarm events
AL3 [DALEE]
10.14
[Log STR=ON]
Sensor test result Enable logging of sensor test
results
AL6 [DSTRE]
10.15
[Log BTS=ON]
Board
temperatures
Enable logging of board
temperature
AL6 [DBTSE]
10.16
[Log IBV=ON]
Internal board
voltages
Enable logging of internal board
voltage
AL6 [DIBVE]
10.17
[Log EDC=ON]
Electrodes DC
voltages
Enable logging of electrodes DC
voltage
AL6 [DEDVE]
10.18
[Log AEC=ON]
Electrodes AC
voltages
Enable logging of electrodes AC
voltage
AL6 [DEAVE]
10.19
[Log EIZ=ON]
Electrodes source
impedance
Enable logging of electrodes
impedance
AL6 [DESIE]
10.20
[Log SCV=ON]
Sensor coils
values
Enable logging of sensor coils
value
AL6 [DSCVE]
30124-60 Rev. 1.0 | unreleased
Page 33
Menu Descriptions
ProComm
Preliminary