MCS MCS-DOOR-KEYPAD - CONFIG CHECKSUMS; CONFIG CHECKSUMS (#0); SERVICE TOOLS (Operating Schedule)

MAGNUM KEYPAD/DISPLAY REVISION 2.2
36
9.27. CONFIG CHECKSUMS
9.28. CONFIG CHECKSUMS (#0)
9.29. SERVICE TOOLS (Operating Schedule)
Service Tools - Cong Checksum
• The top line shows Serv Tools
• Press  to move to ‘Cong Checksum’
• Press function
↵
Press ↵
Service Tools - Sensor Diagnostics
• The top line shows Serv Tools
• Pressing F3 shows next 5 sensors
• Press function F1 to return to sub menu
Press F1to return to sub menu
Service Tools - Operating Schedule
• The top line shows Serv Tools
• Press  to move to ‘Operating Schedule’
• Press function
↵
Press ↵