Melco N1 - Updating the Firmware; Updating Via the Network

1 Press the Menu/Enter button to display the menu list at the home screen.
2 Press the Up/Down buttons and select “Language”, then press the Menu/Enter button.
3 Press the Up/Down buttons and select the display language, then press the Menu/Enter button.
Updating the Firmware
To update the Digital Music Library’s firmware version to the latest one, follow the procedure below.
Updating via the Network
Note: To update the firmware via the network, the Digital Music Library should be connected to the Internet.
1 Press the Menu/Enter button to display the menu list at the home screen.
60
Chapter 4 Advanced Usage