2 Select “MinimServer”.
3 The version of MinimServer to be installed will be shown.
4 Select “OK” to download and install MinimServer.
5 Once MinimServer is installed, it will stop TwonkyServer and then perform a full scan of your music library. This
scan might take some time.
6 When the scan has finished, MinimServer will appear in your UPnP control app.
7 You can use your UPnP control app to browse your library and select music for playback.
How to Update
The MinimServer application can be updated independently of the Digital Music Library firmware.
1 From the main menu, navigate to Settings > Music Database > Version Check.
2 If there is a newer version of MinimServer available, it will be shown.
3 Select “OK” to download and install the new version.
How to Operate
You can rescan your collection or select index trees from the Digital Music Library the same way you would for
TwonkyServer.
You can operate MinimServer using a web browser. Enter “(Digital Music Library’s IP Address):9790” into your web
browser to explore MinimServer’s dedicated web user interface. For Windows and Mac, the MinimWatch application
also can be used for server maintenance and configuration. Please visit minimserver.com/minimserver2/melco for
details.
66
To Next Page
Loading...
