Memjet MACH 5 - Installation and Service Videos (Where to Find); Basic Disassembly; Service Disassembly Procedures

SECTION 5
DISASSEMBLY AND ASSEMBLY
52
Installation and Service Videos (where to find)
Installation and Service Videos are also available for this product.
Neopost/Hasler Technicians: Please see the Knowledgebase for Installation and Service Videos.
Rena Systems Technicians: Please see the Rena Dealer Net area for Installation and Service Videos.
Basic Disassembly
Turn off Power
Disconnect Power Cord
Disconnect Interface Cable
Service Disassembly Procedures
WARNING!
THE FOLLOWING DISASSEMBLY SHOULD ONLY BE DONE BY A QUALIFIED,
TRAINED SERVICE REPRESENTATIVE.
WARNING!
ALWAYS POWER DOWN THE PRINTER BEFORE CONNECTING OR
DISCONNECTING ANY WIRING HARNESSES OR CABLE CONNECTIONS TO
AVOID SERIOUS SHOCK OR INJURY.
CAUTION
• ALWAYS USE APPROPRIATE PERSONAL PROTECTION EQUIPMENT (PPE).
• DISPOSE OF ALL MAINTENANCE WASTE IN ACCORDANCE WITH LOCAL
REGULATIONS.
CAUTION
USE ELECTROSTATIC DISCHARGE (ESD) PROTECTION WHEN WORKING
AROUND ELECTRONIC DEVICES:
• USE STATIC-FREE WORKSTATIONS WHEN UNIT COVERS ARE REMOVED.
• WEAR GROUNDED WRIST STRAPS WHEN WORKING ON UNIT.
• TRANSPORT ELECTRONIC SUBASSEMBLIES IN SEALED STATIC-
SHIELDING PACKAGING
.