Memmert UNplus - Using the ControlCOCKPIT and Basic Operations

Operation and Control
27 D53182 02/2024
See also
2 Materials [}12]
2 Technical Data [}14]
6.4 Operating the Appliance
6.4.1 ControlCOCKPIT
In manual operation, the desired parameters are entered at the ControlCOCKPIT on the
front of the appliance. You can also make basic settings here (menu mode). Warning
messages are also displayed, e.g. if the temperature is exceeded. In programme mode, the
parameters defined, the programme description, the programme segment currently active
and remaining programme runtime are displayed.
ControlCOCKPIT of UF appliances in operating mode:
1 2 3 4
5
6
7
8 9
10
11
12
13 14 15 16
17
18 19 20
1 Activation key for temperature setpoint input 2 Setpoint and actual temperature display
3 Fan speed display 4 Activation key for fan speed setting
5 Switch to menu mode 6 Activation key for digital backwards counter with target
time setting, adjustable from 1 minute to 99 days
7 Main switch 8 Display of digital backwards counter with target time
setting, adjustable from 1 minute to 99 days
9 Air flap position display 10 Activation key for air flap position adjustment