EasyManua.ls Logo

Memmert UNplus - Maintenance and Servicing; Cleaning Procedures

Memmert UNplus
60 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Maintenance and Servicing
54 D53182 02/2024
9. Maintenance and Servicing
DANGER
Danger of suffocation inside the appliance
If the appliances is a certain size, you can get accidentally locked in, which is potentially
life-threatening.
Do not climb into the appliance.
Do not carry out cleaning work in the chamber alone.
DANGER
Live parts
When covers are removed, live parts are exposed and contact with these parts may result
in electric shock. Electric shock can have serious health consequences including death.
Only authorised persons may carry out electrical installation work.
Before starting work, disconnect the unit from the power supply.
Ensure that the unit is fully de-energised.
Secure the unit to prevent it from being switched on again.
CAUTION
Danger of cuts due to sharp edges
Touching sharp edges on the unit may result in cuts.
Wear protective gloves during all work.
Be careful when handling sheet metal parts.
9.1 Cleaning
Interior and metal surfaces
Regular cleaning of the easy-to-clean bath prevents build up of material residues that
could impair the appearance and functionality of the stainless steel chamber over time.
The metal surfaces of the waterbath can be cleaned with normal stainless steel cleaning
agents. Make sure that no rusty objects come into contact with the interior or with the
stainless steel housing. Rust deposits can lead to an infection of the stainless steel. If rust
spots appear on the surface of the interior due to impurities, the affected area must be
immediately cleaned and polished.
Plastic parts
Do not clean plastic parts of the waterbath with caustic or solvent-based cleaning agents.
Glass surfaces
Glass surfaces can be cleaned with a commercially available glass cleaner.
9.2 Regular Maintenance
Once a year, grease the moving parts of the doors (hinges and lock) with thin silicone
grease and check that the hinge screws are not loose.
To guarantee perfect closed-loop control, we recommend calibrating the appliance once a
year (see }8.5Calibrate).
See also
2 Calibrate [}48]

Table of Contents

Related product manuals