Operation and Control
29 D53182 02/2024
2. You can adjust the setpoint (e.g. to 180°C) by turning the turn control anti-clockwise
or clockwise.
3. Save the set value by pressing the confirmation key.
ð The display returns to normal and the appliance starts controlling with reference to
the defined setpoint value.
ð Additional parameters and functions can be set accordingly.
i
If no new values are entered or confirmed for approx. 30 seconds, the appliance
automatically restores the former values.
If you want to discard the settings:
4. Press the activation key on the left or right of the display that you want to exit.
ð The appliance restores the former values.
ð Only the settings that you have saved by pressing the confirmation key will be applied.
6.5 Operating Modes
Manual mode
The appliance runs continuously with the values set at the ControlCOCKPIT.
■ See }6.5.1Manual Mode
Timer mode
Operation with digital backwards counter with target time setting, adjustable from 1
minute to 99 days (Timer): The appliance runs at the values set until the set time has
elapsed.
■ See }6.5.2Digital Backwards Counter
Programme Mode
The appliance automatically runs programme sequences which have been defined using
AtmoCONTROL software at a computer / laptop and then transferred to the appliance from
a USB stick or via Ethernet.
■ See }6.5.3Programme Mode
Remote control mode
Via remote control
■ See }8.3.8Remote Control
The status display shows the current operating mode or operating state of the appliance.
The current operating state is indicated by colour and text display:
Appliance is in programme mode
Programme stopped
Appliance is in manual mode
To Next Page
Loading...
