GENERAL INFORMATION
90-828631R3 MARCH 1999 Page 1C-7
Propeller Removal/Installation
Standard Models
WARNING
If the propeller shaft is rotated while the engine is in gear, there is the possibility that
the engine will crank over and start. To prevent this type of accidental engine start-
ing and possible serious injury caused from being struck by a rotating propeller,
always shift outboard to neutral position and remove spark plug leads when you
are servicing the propeller.
1. Shift outboard to neutral position.
N
N
2. Remove the spark plug leads to prevent engine from starting.
3. Straighten the bent tabs on the tab washer.
a
To Next Page
Loading...
Need help?
General
