Mercury 45 Service Manual

OUTBOARD MOTOR INSTALLATION
90-828631R3 MARCH 1999 Page 1D-3
Lifting Outboard
1. Use lifting eye on engine.
Steering Cable
STARBOARD SIDE ROUTED CABLE
1. Lubricate the entire cable end with 2-4-C Lubricant with Teflon.
95
2-4-C w/Teflon (92-850736A1)
95
2. Insert steering cable into tilt tube.
3. Torque nut to specified torque.
Nut Torque
35 lb-ft (47.5 Nm)

Mercury 45 Specifications

General

Horsepower	45 HP
Cylinders	3
Starting	Electric
Full Throttle RPM Range	5000-6000 RPM
Steering	Remote
Exhaust	Through Prop
Shaft Length	20 in