Mercury 45 Service Manual

OUTBOARD MOTOR INSTALLATION
90-828631R3 MARCH 1999 Page 1D-7
Wiring Harness
IMPORTANT: Warning Horn Requirement – The remote control or key switch assem-
bly must be wired with a warning horn. This warning horn is used with the engine
warning system.
1. Route wiring harness into bottom cowl.
2. Connect wiring. Place harness into the holder.
GRN/WHT
BLU/WHT
BRN/WHT
TAN
BLU/WHT
GRN/WHT
a
b
a-Power Trim Connections
b-Holder – Place Harness Into Holder

Mercury 45 Specifications

General

Horsepower	45 HP
Cylinders	3
Starting	Electric
Full Throttle RPM Range	5000-6000 RPM
Steering	Remote
Exhaust	Through Prop
Shaft Length	20 in