GASOLINE ENGINES BRAVO MODELS
Page 57 of 116
7. Connect fuel line to appropriate location as shown. Refer to the following caution for
proper tightening.
CAUTION
Remove plastic plug from fuel inlet hole. Apply #592 Loctite Pipe Sealant with Teflon
to threads of fuel inlet line connector. DO NOT USE TEFLON TAPE. To prevent
cracking the casting and/or fuel leaks, turn inlet connector in by hand until finger
tight, then tighten connector to 1-3/4 to 2-1/4 turns with wrench. DO NOT OVER-
TIGHTEN. Inspect for fuel leaks when first starting engine.
75036
a
b
Models with Cool Fuel System
a-Fuel Inlet Hose Connects Here
b-Fuel Filter Cover
75429
a
Carbureted Models
a-Fuel Inlet Hose Connects Here
To Next Page
Loading...
