72
Peak
Tapping the Peak Reset (PK) will reset the Meters Peaks
Mon > Cue
Allows the operator to override the Cue Mix by sending the Monitor Set directly to the Cue
listener. Only Speaker Set Monitor types can override cues. To prevent a Cue monitor set from
being overridden, enable the inactive option under Settings>Monitors of the selected Cue.
Ref
Select to recall your reference level, the default Reference level is set to -20 dB and can be
configured from the Anubis Settings>Monitor Level
Dim
Turns the selected Speaker Set output dimmer ON, the default Dim level is set to -20 dB and can
be configured from the Anubis Settings>Monitor Level
To Next Page
Loading...
