Metor 6M PAGE 9
Installation and Operating Manual
92102916 REV 5 4. INTRODUCTION
4. INTRODUCTION
Intended use
The Metor 6M is a walk-through metal detector (WTMD) designed to detect metal
objects people are carrying with them. The system is used primarily for weapons
detection. Typical applications are:
• Airports, seaports: passenger screening
• Courthouses, federal buildings: visitor screening
• Prisons: visitor screening
• Conferences, public buildings, sporting/special events, stadiums, concerts:
access control
• Power plants/factory: employee, visitor screening
• Industry: loss prevention
• Hotels, restaurants, casinos, discotheques / night clubs: visitor screening
The manufacturer disclaims all liability if the equipment is used for purposes
incompatible with the above descriptions.
The engineering and manufacture of this product is based on long experience and
research. The equipment is designed so that its use according to the instructions
does not, pursuant to currently available knowledge, cause any health risks to
pregnant women, persons with a pacemaker, or any other people walking through
the detector.
To Next Page
Loading...