Metor 6M - Statistics and Counters; Counter Values and Alarm Rate

Metor 6M PAGE 55
Installation and Operating Manual
92102916 REV 5 11. ACCESSIBILITY PARAMETERS
Creating new User ID
1. Press . When the program requests “ENTER USER ID:”, enter “0”. 
Press .
2. Enter the access code, and press .
3. Press to display “Accessibility parameters”.
4. Press once to display “Users”. Then press .
5. Press once to display “Manage users”.
6. Press once to display “Add new user”. Press .
7. The program requests: CONFIRM OPERATION “OK“=YES “C“=CANCEL.
Press .
8. First free user ID is shown. Press to select it or use and keys to
scroll through the free IDs to select. Alternatively you can use key to enter
the ID with numeric keys.
9. Enter access code for the new user ID. Press .
10. Re-enter the access code. Press .
11. Select user Group with and keys. Press . The text “Operation
completed OK” will be displayed.
12. Hold down for a moment to return to normal mode.
Defining group privileges
1. Press . When the program requests “ENTER USER ID:”, enter “0”. Press
.
2. Enter the access code, and press .
3. Press to display “Accessibility parameters”.
4. Press once to display “Users”. Then press .
5. Press twice to display “User groups”. Press .
6. Press once to display “Define group privileges”. Press .
7. The program requests: CONFIRM OPERATION “OK“=YES “C“=CANCEL.
Press .
8. Select user Group with and keys. Press .
9. Select the menu item to be configured by
keys.
10. (Program may request: CLEAR GROUP = 0 / MODIFY GROUP = 1. Press 1
to modify.)
OK
OK
OK
OK
OK
OK
2
3
OK
OK
2
3
OK
OK
OK
OK
OK
OK
2
0
7
12
3
OK
OK
OK
OK
0 2
OK
OK
C
OK
OK
OK
OK
OK
OK
2
3
OK
OK
2
OK
OK
2
OK
OK
OK
OK
0 2
OK
OK
0
1 2 3