PAGE 54 Metor 6M
Installation and Operating Manual
11. ACCESSIBILITY PARAMETERS 92102916 REV 5
Resetting of access codes
User ID locking
If the access code for some user ID is entered three times incorrectly, the user ID
will be locked. Each user IDs are handled separately. Three wrongly entered access
codes will lock the user ID even if another user is accessed between attempts. E.g.
a person enters the wrong access code for user X twice, then enters right access
code for user Y and tries the wrong user X access code again, the user X will be
locked.
The count for wrong access codes entered will be cleared when the correct access
code for that user ID is entered.
A locked user can be unlocked by another user with sufficient privileges using
"Modify User" menu item.
A locked user 0 can only be unlocked by resetting the access code with the Learn
button.
There may be situations when you need to
reset User 0 access code. To do this press
and hold the LEARN button (1) for more
than 5 seconds.
1
To Next Page
Loading...